OVERVIEW
Xypex Concentrate is the most chemically active of the Xypex waterproofing products. When mixed
with water, this light grey powder is applied as a slurry coat to above-grade or below-grade
concrete either as a single coat or as the first of a two-coat application. It is also mixed
in Dry-Pac form for sealing strips at construction joints, or for the repairing of cracks,
faulty construction joints and honeycombs.
PRODUCT DESCRIPTION
Xypex is a unique chemical treatment for the waterproofing and protection of concrete. XYPEX
CONCENTRATE is the most chemically active of the Xypex waterproofing products and is formulated
for application to hardened concrete surfaces. When mixed with water, this light grey powder is
applied as a cementitious slurry coat to above-grade or below-grade concrete, either as a single
coat or as the first of a two-coat application. It is also mixed in Dry-Pac form for sealing
strips at construction joints, or for the repairing of cracks, faulty construction joints and
honeycombs. Xypex prevents the penetration of water and other liquids from any direction by
causing a catalytic reaction that produces a non-soluble crystalline formation within the pores
and capillary tracts of concrete and cement-based materials.
RECOMMENDED FOR:
Reservoirs
Sewage and Water Treatment Plants
Underground Vaults
Secondary Containment Structures
Foundations
Tunnels and Subway Systems
Swimming Pools
Parking Structures
ADVANTAGES
Resists extreme hydrostatic pressure
Becomes an integral part of the substrate
Can seal hairline cracks up to 0.4 mm
Allows concrete to breathe
Highly resistant to aggressive chemicals
Non-toxic
Does not require dry weather or a dry surface
Cannot puncture, tear or come apart at the seams
No costly surface priming or leveling prior to application
Does not require sealing, lapping and finishing of seams at corners, edges or between membranes
Can be applied to the positive or the negative side of the concrete surface
Does not require protection during backfilling or during placement of steel, wire mesh or other materials
Less costly to apply than most other methods
Not subject to deterioration
Permanent
PACKAGING
Xypex Concentrate is available in 20 lb. (9.1 kg) pails, 60 lb. (27.3 kg) pails and 50 lb. (22.7 kg) bags.
STORAGE
Xypex products must be stored dry at a minimum temperature of 45°F (7°C). Shelf life is one year when
stored under proper conditions.
COVERAGE
For normal surface conditions, the coverage rate for each Xypex coat is 6 - 7.2 sq. ft./lb. (1.25 -
1.5 lb./sq. yd. or 0.65 - 0.8 kg/m2).
