OVERVIEW
Xypex Patch'n Plug is formulated as a crystalline, fast-setting, non-shrink, high-bond-strength,
hydraulic cement compound for concrete repairs. It stops flowing water in seconds and is used to
seal cracks, fill tie-holes and other defects in concrete.
PRODUCT DESCRIPTION
XYPEX PATCH'N PLUG is formulated as a fast-setting, non-shrink, high-bond-strength, hydraulic
cement compound for concrete patching and repair. Patch'n Plug stops flowing water in seconds
and is used to seal cracks, fill tie-holes and other defects in concrete. The high performance
characteristics of Patch'n Plug are enhanced by Xypex's unique crystalline waterproofing technology.
RECOMMENDED FOR:
Stopping an active flow of water through cracks
Repair of concrete substrates before the application of Xypex coating materials
ADVANTAGES
Single component (simply add water)
Fast setting: two to three minutes at 70°F (21°C)
Excellent structural strength
As durable as the masonry and concrete to which it is applied
Non-metallic (won't rust or deteriorate)
Non-toxic
PACKAGING
Xypex Patch'n Plug is available in 20 lb. (9.1 kg) and 60 lb. (27.3 kg) pails.
STORAGE
Xypex products must be stored dry at a minimum temperature of 45°F (7°C). Shelf life is one year
when stored under proper conditions.
COVERAGE
One 60 lb. (27.3 kg) pail of Xypex Patch'n Plug will produce 0.64 cubic feet (0.02 cu. metres)
of mortar.
TEST DATA
PHYSICAL PROPERTIES
TEST METHOD
TYPICAL RESULTS
Comprehensive Strength
ASTM C109
psi
(MPa)
at 24 hours
2100
(14.3)
at 7 Days
3100
(21.3)
at 28 Days
4500
(31.0)
Setting Time
ASTM C266
minutes
seconds
Initial Set
3
50
Final Set
9
10
Tensile Bond
Pull-Off
CSA A23.2-6B
psi
(MPa)
120
(0.8)
Note: Samples prepared with 1 part water to 3.25 parts dry powder by volume (1 part water to 4
parts dry powder by mass). Setting time was determined using Gilmore needles.
